The Decaf IOC-350 consists of a 5.0″ 800×480 colour LCD, the 72MHz Cortex-M3 mpu board with digital and analog I/O as follows:
Digital Inputs (8) are used to sense the state of binary devices such as push buttons, limit switches, bi-metal temperature switches, relays and logic levels. Inputs are active L.
Digital Outputs (8) can be used to drive low current LEDs (e.g. indicators), solid state relays and anything that accepts a 0-3V3 CMOS signal. Outputs are active H.
Analog Inputs (8) are used to measure 0-5Vdc continuous signals generated by sensors for temperature, humidity, gas pressure, light level or position.
All Decaf boards include a Real Time Clock that can be set and queried by your apps.
Product Package includes
- fully assembled and tested mpu, LCD and I/O board with latest firmware.
- USB cable.
Resources (download from Support Pages)
- PiXCL 11 ISC development kit and app builder.
- Firmware upgrades and loader utilities.
- 8 way switch debouncer module that plugs directly into the digital input connector. This allows switches, relays and similar mechanical contacts to connected without any additional hardware components.
- External DC power supply (120Vac/60Hz)
Copyright © 2016-2018 PiXCL Automation Technologies Inc., Canada. All Rights Reserved.