Using multiple Decaf boards.

Common questions answered
Post Reply
Site Admin
Posts: 30
Joined: Tue Jan 14, 2014 12:39 pm

Using multiple Decaf boards.

Post by admin » Tue Jul 07, 2015 9:03 pm

All Decaf boards have a unique serial number, and are identified to the host. This means that any combination of boards, with or without LCDs can be configured to a singe host. The only requirement is that adequate power has to be supplied to the boards. This is best handled via a powered USB2 hub device that allows up to 500mA per each hub port. In practice, most Decaf IOC boards draw around 20mA or less when running, while boards with LCDs draw around 100mA.
Stewart (Admin) @ pixcl

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest