PiXCL Sensors and Controls

Information on using PiXCL sensors and controls and similar products from other manufacturers with Decaf boards.
Post Reply
Site Admin
Posts: 30
Joined: Tue Jan 14, 2014 12:39 pm

PiXCL Sensors and Controls

Post by admin » Mon Nov 23, 2015 8:48 am

At present we have three capacitive touch panel kits with 4, 8 or 16 pads. These devices can be used directly as digital inputs for any Decaf board. The panels (SW-CAP-4, SW-CAP-8, SW-CAP-16) have mounting holes and are touch sensitive on both sides of the board. A simple flat cable with inputs, power and ground is supplied.

All PiXCL sensors will include Decaf board firmware support.

Decaf boards can also use any sensor from http://www.phidgets.com.
Stewart (Admin) @ pixcl

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest