Page 1 of 1

PiXCL Sensors and Controls

Posted: Mon Nov 23, 2015 8:48 am
by admin
At present we have three capacitive touch panel kits with 4, 8 or 16 pads. These devices can be used directly as digital inputs for any Decaf board. The panels (SW-CAP-4, SW-CAP-8, SW-CAP-16) have mounting holes and are touch sensitive on both sides of the board. A simple flat cable with inputs, power and ground is supplied.

All PiXCL sensors will include Decaf board firmware support.

Decaf boards can also use any sensor from http://www.phidgets.com.