Getting the Decaf / IOC firmware version

Installation, Configuration, Device Firmware Upgrade, Specifications
Post Reply
Posts: 10
Joined: Mon Jul 13, 2015 2:31 pm

Getting the Decaf / IOC firmware version

Post by StewD » Thu Nov 14, 2019 3:33 pm

Two ways:
If the Decaf board has a LCD, the power-up screen shows the firmware version, 7.0 (November, 2019).

and for all Decaf boards, run the USBView utility downloadable from the Support Pages. Select the USB Input Device that's equates to your Decaf board.
In the Device Descriptor section, the reported Device ID is the firmware version. e.g. 0x0700 == v7.00

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest