IOC-1 / -1sp / -M board status

Information on the base model Input-Output-Controller (IOC) and the IOC-1sp Sensor Platform kit.
Post Reply
Site Admin
Posts: 33
Joined: Tue Jan 14, 2014 12:39 pm

IOC-1 / -1sp / -M board status

Post by admin » Fri Aug 19, 2016 9:12 am

We have fully functional firmware for both models, and pre-production connector circuit boards. Decaf product launch is scheduled for mid-November.

15-Oct-2016: A new board, the IOC-M Control Module has been created with fully functional firmware. The IOC-M is a 1/2 credit card size module intended for integration on to another circuit board, either soldered in or fitted to a 2x20 x 0.600" socket. The module has
  • 8 digital inputs
  • 8 digital outputs (active H)
  • 2 digital control outputs (active L)
  • 2 analog inputs
  • COM Port
  • SPI external device support
  • an on-board LED
As with all Decaf boards, it appears to the host as an Human Interface Device, and is fully supported by PiXCL 11.
Stewart (Admin) @ pixcl

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest